Call or text us(502) 561-0375
Composite deck boards with a contrasting border board

Deck Resurfacing in Louisville: New Boards, Same Frame

Deck resurfacing in Louisville replaces worn deck boards, stair treads and fascia on a sound existing frame, usually with composite decking.

Photo: MoistureShield

Deck resurfacing means taking up the old deck boards and installing new ones on the existing frame, without rebuilding the posts, beams and joists. It suits Louisville homeowners whose deck is the right size in the right spot but whose wood boards are splintered, cupped or due for yet another coat of stain. When we resurface, MoistureShield composite is the board we reach for first, though TimberTech, Trex and wood are all options.

When resurfacing makes sense, and when it does not

Resurfacing only works on a sound frame, so the frame gets checked before new boards are priced:

  1. Joists and beams. Soft spots, sagging, and rot along the tops of the joists, where water sits under old boards.
  2. The ledger board. Where the deck meets the house: rot, missing or failed flashing, and nails where bolts or structural screws belong.
  3. Posts and footings. Movement, heaving, or rot at the ground line.
  4. Joist spacing. Many older wood decks were framed wider than composite makers allow for their boards, so extra joists may need to go in.

If the ledger or several joists are failing, new boards on top only hide the problem. Then deck repair comes first, or a full rebuild under custom deck design and construction is the better spend.

Composite upgrade options

  • MoistureShield. Our primary decking. MoistureShield makes it in the USA as a capped wood composite with a solid core. Its CoolDeck colors, found in the Vision and Meridian lines, absorb up to 35% less heat by MoistureShield’s own measure, a real difference on a south-facing deck.
  • TimberTech. Composite lines, plus the AZEK PVC lines for a lighter, all-plastic board.
  • Trex. Composite lines from Select through Transcend.
  • Wood again. Red cedar or pressure-treated pine, if you prefer wood and accept the sealing that comes with it.

A resurface is also the time to change the look: a picture-frame border, a contrasting fascia, or new railings and stairs to match the boards. The materials page compares the products side by side.

What resurfacing costs

HomeAdvisor’s June 2026 data puts composite decking at $15 to $32 a square foot. Your total also depends on tearing off and hauling the old boards, any joists that need adding, stair treads, fascia, and whether the railings change too.

The deck builder has a resurface mode built for exactly this: new boards on the frame you have. Five steps get you a plan to send us; the real price is set on site after the frame has been looked at.

Thinking about a roof as well?

If you might want shade over the deck, decide before the new boards go down. A roof needs posts that carry its weight to footings, and those posts may have to pass through or bear on the deck frame. Louisville Decks is part of Louisville Roofing, so the same company can resurface the deck and build the roof over it, in that order, without tearing up new boards. See covered decks and roofs over existing decks.

Text or call (502) 561-0375 with a few photos of your deck to start.

Questions homeowners ask about deck resurfacing

What does it mean to reface a deck?

Refacing, resurfacing and re-decking all mean the same thing: new deck boards, and usually new stair treads and fascia, on the existing frame. The structure stays and the surface changes.

Is it better to sand or power wash a deck?

That choice applies to refinishing wood. Sanding removes raised grain and old finish; power washing on a high setting can gouge soft wood, so a low setting with a deck cleaner is safer. Composite boards need neither sanding nor stain, only washing.

How much should a deck rebuild cost?

A rebuild replaces the frame as well as the boards, so it costs close to a new deck. The 2025 Cost vs. Value report priced a 16-by-20-foot Louisville deck at $17,433 in wood and $23,502 in composite. Resurfacing costs less when the frame can stay.

Do I need a permit to rebuild an existing deck?

Often yes when the work replaces structure (footings, posts, beams, joists or the ledger) or changes the deck’s size. Swapping boards alone is often treated differently. Louisville Metro sets the rules, so confirm with its permit office before work starts.

Talk to us about deck resurfacing and composite upgrades.

Call or text us directly, or send the form and we will get back to you.

(502) 561-0375

Serving Louisville, Kentucky and nearby communities.

Call usGet in touch